|
1. Disconnect a negative wire from the battery.
2. Open a back door.
3. Open a cover of access and disconnect an electrical wiring from the combined lamps which are built in at a door back.
4. Release fixing clamps / turn out screws and remove the lower panel of an internal upholstery of a door of a back.
5. Having hooked, remove a protective cap of a shpindelny nut of the lever of a screen wiper, disconnect the socket of a hose of supply of the washing liquid from a spindle.
6. Give a nut and remove the lever from a spindle. |
|
7. Give a nut of fastening of a spindle and remove a plastic cover and a sealant. |
|
|
8. Disconnect from the union on back the parties of a driving electric motor a hose of supply of the washing liquid. |
|
|
9. Disunite two contact sockets of an electrical wiring on assembly of the driving motor. |
|
10. Turn out four fixing bolts. |
|
|
11. Remove driving assembly. |
|
|
12. At desire the electric motor can be removed from driving assembly after an otdavaniye of a nut of fastening (A) of its spindle to draft, and also three bolts of fastening (B) of the motor. |
|
